Your position: Home
Wired Matching Code: Use network cable to connect router and cameras. Use switch to match code for muti Cameras at a time, press the button of reset key on router for 3 seconds to match code according to voice warning. When invoice indicates the success of matching code, it means the camera has been matched code successfully. (To restore factory settings by pressing the button10 seconds). |
Router Indicator Light This router has 5pcs leds indicators in total, the right one is wired network indicator, light-on means router connects with wired network. 4 leds light on left side indicate the number of wireless cameras connected. 4 light are on while 4 cameras are connected successfully. |
Repeater Set up IPC router can use as a repeater in a wireless NVR system. A: Connect the IPC router with NVR by cable B: Searching the IPC router in video management page, double click “Router”, then click match button to finish match code. |
Connect NVR through N1 After matching code successfully, use a network cable to connect the router and NVR. Right click the mouse → video management → refresh, search wireless IPC and IP address of router (router IP default to 192.168.1.1.198), click one key to add or “add” to add wireless IPC on NVR, if show of different segments, please use one key to add. |